LMD-2030W is an elegant 20-inch widescreen LCD monitor designed to complement the Sony High Definition Video (HDV) product range. LCD displays are increasingly replacing CRT monitors in the commercial arena due to their increased operational flexibility and lower total cost of ownership. Equipped with a HDMI interface as standard, this new entry-level monitor is an ideal match for professional and semi-professional high-definition applications.
Picture Performance
|
Type
|
A-Si TFT Active Matrix LCD
|
|
Resolution
|
1680 x 1050 pixels (WSXGA+)
|
|
Picture Size (H x W) (Viewable area) (Diagonal)
|
Approx. 433 x 271 mm
(Approx. 17 1/8 x 10 3/4 inches)
Approx. 511 mm (20.1-inch)
|
|
Aspect
|
16:10
|
|
colours
|
Approx. 16,700,000
|
|
Viewing Angle
|
89°/89°/89°/89° (typical) (up/down/left/right contrast>10:1)
|
Input
|
Line A
|
Composite
BNC x 1, 1.0 Vp-p ±3dB, sync 0.3 Vp-p negative
Y/C
4-pin mini-DIN x 1
Y: 1. 0Vp-p ±3 dB
C: 0.286 Vp-p ±3 dB (NTSC), 0.3 Vp-p ±3 dB (PAL),sync 0.3 Vp-p negative
Audio in
RCA pin x 1, -5 dBu 47 ohms or higher
|
|
RGB/Component
|
RGB/Component
BNC x 3, 0.7 Vp-p ±3 dB (Sync on Green 0.3 Vp-p, negative: RGB) (75% chrominance standard colour bar signal: Component)
Audio in
RCA pin x 1, -5 dBu 47 kohms or higher
|
|
Option
|
D1-SDI
D-sub 9-pin x 1
Audio in
AUDIO input (RCA pin x1), -5 dBu 47 kohms or higher
|
|
Exernal Sync
|
BNC x1, 0.3 to 4 Vp-p negative polarity binary
|
|
HDMI input
|
HDMI x 1
|
|
Remote
|
Parallel remote
Modular connector 8-pin x1
|
Output
|
Line A
|
Composite
BNC x 1, Loop-through, with 75 ohms automatic termination
Y/C
DIN 4 pin x 1, Loop-through, with 75 ohms automatic termination
Audio out
RCA pin x1, Loop-through
|
|
RGB/Component
|
RGB/Component
BNC x3, Loop-through, with 75 ohms automatic termination
Audio out[br}BNC x1, Loop-through, with 75 ohms automatic terminal function
|
|
Exernal Sync
|
BNC x1, Loop-through, with 75 ohms automatic terminal function
|
|
Built-in speaker output
|
0.5 W (mono)
|
General
|
Line A
|
Composite
BNC x 1, Loop-through, with 75 ohms automatic termination
Y/C
DIN 4 pin x 1, Loop-through, with 75 ohms automatic termination
Audio out
RCA pin x1, Loop-through
|
|
RGB/Component
|
RGB/Component
BNC x3, Loop-through, with 75 ohms automatic termination
Audio out[br}BNC x1, Loop-through, with 75 ohms automatic terminal function
|
|
Exernal Sync
|
BNC x1, Loop-through, with 75 ohms automatic terminal function
|
|
Built-in speaker output
|
0.5 W (mono)
|
 Product Information, PDF
To discuss at a forum
|
Developed by