20-inch Widescreen Multi-format LCD Monitor

LMD-2050W is an elegant 20-inch widescreen LCD monitor designed for demanding broadcast and professional applications. LCD displays are increasingly replacing CRT monitors in the professional arena due to their increased operational flexibility and lower overall ownership cost.
 

Picture Performance

Type	A-Si TFT Active Matrix LCD
Resolution	1680 x1050 pixels (WSXGA+)
Picture Size (H x W) (Viewable area) (Diagonal)	Approx. 433.5 x 272.9 mm (Approx. 17 1/8 x 10 3/4 inches) Approx. 511.1 mm (20 1/8 inches)
Aspect	16:10
colours	Approx 1,677,000 colours (8bits)
Viewing Angle	89°/89°/89°/89° (typical) (up/down/left/right contrast>10:1)

Input

Standard

Composite BNC x 1, 1.0 VP-p ±3dB sync negative Y/C 4pin Mini DIN x 1 Y: 1.0 Vp-p ± 3dB sync negative C: 0.286 Vp-p ± 3dB (NTSC burst signal level), 0.3 Vp-p ± 3dB (PAL burst signal level) RGB, Component BNC x 3 RGB : 0.7 Vp-p ± 3dB (Sync On Green, 0.3 Vp-p sync negative) Component : 0.7 Vp-p ± 3dB (75% chrominance standard colour bar signal) External Sync BNC x 1 0.3 to 4.0 Vp-p ± bipolarity ternary or negative polarity binary Audio RCA pin x 2 (L, R) -5 dBu 47 k ohms or higher HD15 D-sub 15 pin x 1 R/G/B: 0.7 Vp-p sync positive (Sync On Green, 0.3 Vp-p sync negative) Sync : Total level (polarity free, H/V separate and composite sync) Plug & Play function : corresponds to DDC-2B DVI TMDS signal link Parallel remote Modular connector 8 pin x 1 (pin assignment at users' allocation) Serial remote (LAN) D-sub 9-pin (RS232C) x 1 RJ-45 modular connector (ETHERNET) x 1 (10BASE-T/100BASE-TX) DC in XLR type 4pin x 1 DC24V (output impedance 0.005 ohms or less)

Optional

Option input slot, 2 slots (for HD-SDI, SDI capability and extra analogue I/O's)

Output

Standard

Composite BNC x 1, Loop-though, with 75 ohms automatic termination Y/C 4pin mini DIN x 1 Loop-though, with 75 ohms automatic termination RGB, Component BNC x 3, Loop-though, with with 75 ohms automatic termination External Sync BNC x 1, Loop-though, with 75 ohms automatic termination Audio monitor out RCA pin type x 2 (L, R) Speaker (Built-in) 1 W + 1 W (stereo)

General

Power Requirement	AC100V to 240V 50/60Hz 0.4A to 0.8A, DC24V 3.3A
Power Consumption	Maximum Approx. 95 W (with 2 x BKM-229X)
Operating Temperature	0 to 35 °C (recommended operation temperature 20 to 30 °C)
Operating Humidity	30 to 85% (No condensation)
Storage & Transport Temperature	-20 to 60 °C
Storage & Transport Humidity	0 to 90 %
Operating/Storage/Trans. Pressure	700 to 1060 hPa
Dimensions (W x H x D)	Dimension 518.5 x 468.4 x 269.9 mm (20 1/2 x 18 1/2 x 10 3/4 inch) Dimension without stand 518.5 x 328.7 x 104.7 mm (20 1/2 x 13 x 4 1/8 inch)
Display Stand (W x H x D)	320.0 x 361.5 x 269.9 mm (12 5/8 x 14 1/4 x 10 3/4 inches)
Mass	With two option boards Approx. 10.5 kg ( 23 lb 2 oz) with BKM-229X x 2 Without option boards Approx. 10.1 kg ( 22 lb 4 oz)

 Product Information, PDF

 Data Sheet, PDF