Developed in partnership with Colorfront, the FS-HDR’s HDR/WCG functionality is powered by Colorfront Engine proprietary video processing algorithms. With Colorfront Engine, FS-HDR enables real time processing of a single channel of 4K/UltraHD/2K/HD including down-conversion to HD HDR or up to four channels of 2K/HD simultaneously.
FS-HDR can take incoming imagery from popular professional cameras in the world today and convert their LOG output in realtime to 4K/UltraHD or 2K/HD and output as either HDR or SDR. This greatly simplifies workflows in a mixed camera environment and provides for a unified input workflow to HDR or SDR capable switchers and more. Additionally, FS-HDR provides the ability to convert to Sony S-Gamut/S-Log3 on output from any of these sources for workflows requiring this Log feed to compatible switchers and more.
In Single-Channel mode, FS-HDR gets you fast 4K/UltraHD delivery, processing and synchronization with digital video connectivity including Quad 1.5G, Dual 3G, Quad 3G over 3G-SDI and 12Gb/6Gb over optional 12G-SDI BNC and 12G-SDI LC Fiber SFP modules. FS-HDR will up scale your HD or SD materials to 4K/UltraHD and back, with a huge array of audio channels over Fiber, 3G-SDI, AES, and MADI for an incredible 272 x 208 matrix of audio possibilities.
Also you can configure FS-HDR in Four-Channel Mode, for Multi-Channel HD HDR processing. In this mode FS-HDR provides incredibly powerful multi-channel conversion with up to 4 channels of simultaneous HDR processing for 2K/HD and SD signals. Powerful conversion processing also allows Region of Interest (ROI) scaling, color correction, proc amp controls, motion adaptive deinterlacing and much more. In 4-Channel mode you can also bring in a single HD source and process four separate outputs from it, each with their own HDR/SDR transformations.
SPECS:
|
Input Dynamic Range/Color Gamut
|
SDR BT.709 100 Nits
PQ BT.2020 1000 Nits
PQ P3D65 1000 Nits
Hybrid Log Gamma BT.2100
Sony S-Gamut3/S-Log3
ARRI Log C Wide Gamut
Panasonic V-log
RED Log3G10 Wide Gamut
Canon Log 2
Canon Log 3
|
|
Output Dynamic Range/Color Gamut
|
SDR BT.709 100 Nits
PQ BT.2020 1000 Nits
Hybrid Log Gamma BT.2100
Sony S-Gamut3/S-Log3
|
|
HDR Conversions
|
HDR to HDR
HDR to SDR
SDR to HDR
|
|
Colorimetry
|
Supports BT.709 and BT.2020
|
|
Mode of Operation
|
Four Independent 2K, HD, or SD Video Processors
One 4K, UltraHD, 2K, HD, or SD Video Processor
|
|
Video Formats
|
(4K) 4096 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(UltraHD) 3840 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(UltraHD) 3840 x 2160PsF 23.98, 24, 25, 29.97, 30
(2K) 2048 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(HD) 1920 x 1080PsF 23.98, 24, 25, 29.97, 30
(HD) 1920 x 1080i 50, 59.94, 60
(HD) 1280 x 720p 50, 59.94, 60
(SD) 625i 50
(SD) 525i 59.94
YCbCr, 4:2:2, 10-bit
|
|
Video Input Digital
|
4 x 3G-SDI inputs, 4 x BNC
4 x 3G-SDI inputs, 4 x Fiber or HD-BNC (optional SFP modules)
SFP fiber modules, 3G-SDI, dual LC, single LC, or single SC, SMPTE-297
SFP fiber module, 12G/6G-SDI, dual LC, SMPTE-297
SFP coax module, 12G/6G-SDI, dual HD-BNC
12G/6G/3G/HD/SD, SMPTE-259/292/424/2081/2082
Single Link 12G/6G-SDI (with optional SFP module)
Quad Link 3G-SDI Level A or B-DL (4 x 3G), SMPTE-425-5
Dual Link 3G-SDI Level B-DS (2 x 3G), SMPTE-425-3
Single Link 3G-SDI Level A, B-DL, or B-DS, SMPTE 425
Quad Link HD-SDI (4 x 1.5G)
Dual Link HD-SDI (2 x 1.5G), SMPTE-372
Single Link HD/SD
Quadrant (Square Division) or 2SI (Two Sample Interleave) 4K/UltraHD input pixel mapping
8 x 1 selector feeds video processor(s)
|
|
Video Output Digital
|
4 X 3G-SDI outputs, 4 x BNC
4 x 3G-SDI outputs, 4 x fiber or HD-BNC (optional SFP modules)
SFP fiber modules, 3G-SDI, Dual LC, Dual LC CWDM, Single LC, or Single SC, SMPTE-297
SFP fiber module, 12G/6G-SDI, dual LC, SMPTE-297
SFP coax module, 12G/6G-SDI, dual HD-BNC
12G/6G/3G/HD/SD, SMPTE-259/292/424/2081/2082
Single Link 12G/6G-SDI (with optional SFP module)
Quad Link 3G-SDI Level A or B-DL (4 x 3G), SMPTE-425-5
Dual Link 3G-SDI Level B-DS (2 x 3G), SMPTE-425-3
Single Link 3G-SDI Level A, B-DL, or B-DS, SMPTE 425
Quad Link HD-SDI (4 x 1.5G)
Dual Link HD-SDI (2 x 1.5G), SMPTE-372
Single Link HD/SD
Quadrant (Square Division) or 2SI (Two Sample Interleave) 4K/UltraHD output pixel mapping
|
|
Monitor Output Digital
|
1 x BNC, 1 x 3G-SDI output
3G-SDI/HD/SD, SMPTE-259/292/424, 10-bits
1 x HDMI, 1 x HD output
2K/HD/SD, HDMI v1.4a
No HDR Infoframe generation
Monitored Video Processor output (video and audio) is simultaneously output on both connectors
4K/UltraHD down-converted to 2K/HD
Crop control on HDMI output
|
|
Video Processing
|
Motion adaptive deinterlacer
Proc amp controls
Color corrector
Legalizer
Frame rate conversion/film cadence removal/insertion (3:2, 1:2, 2:1, 2:3)
Adjustable delay 0-6 frames with H and V timing controls in lines and pixels
Closed Captioning conversion (CEA-608/CEA-708)
AFD input detection, down-convert control, and output pass through or overwrite
Freeze (manual or on input signal loss) to black or last good frame
Matte generator for background fill
Video test generator
Nominal video delay HD/SD, 2 frames (LFR), 4 frames (HFR)
|
|
Format Conversion
|
Convert any supported input format to any supported output format, within the same frame rate family. These three families are:
59.94, 29.97, 23.98
50, 25
60, 30, 24
|
|
Scaling
|
Supported in 2K/HD/SD formats
Zoom in and out
Reposition
Region of Interest (ROI)
|
|
Up-Conversion
|
Hardware 10-bit
Zoom 14:9: results in a 4:3 image zoomed slightly to fill a 14:9 image with black side bars
Zoom Letterbox: results in image zoomed to fill fullscreen
Zoom Wide: results in a combination of zoom and horizontal stretch to fill a 16:9 screen; this setting will introduce a small aspect ratio change
|
|
Down-Conversion
|
Hardware 10-bit
Anamorphic: fullscreen
Letterbox: image is reduced with black top and bottom added to image area with the aspect ratio preserved
Crop: image is cropped to fit video output format
|
|
Aspect Ratio Conversion for SD to SD
|
Letterbox: Transforms SD anamorphic material to a letterboxed image
H Crop: Produces a horizontally stretched effect on the image; transforms anamorphic SD to full frame
SD Pillarbox: Produces an image in the center of the screen with black borders on the left and right sides and an anamorphized image in the center
V Crop: Transforms SD letterbox material to an anamorphic image
|
|
Audio Input Digital
|
48 kHz sample rate
8 x SDI embedded inputs (16-Channels each)
128-Channels, 24-bit (20-bit SD), SMPTE-272/299
8 x balanced AES inputs (16-Channels), 1 x DB-25
16-Channels, 24-bit, AES-3
2 x MADI inputs, 1 BNC, 1 x ST Fiber
128-Channels, 24-bit, AES-10
|
|
Audio Output Digital
|
48 kHz sample rate
1 x SDI embedded output per Video Processor (16-Channels each)
16-Channels (in single Video Processor mode), 24-bit (20-bit SD), SMPTE-272/299
64-Channels (in four Video Processor mode), 24-bit (20-bit SD), SMPTE-272/299
8 x balanced AES outputs (16-Channels), 1 x DB-25
16-Channels, 24-bit, AES-3
2 x MADI outputs, 1 BNC, 1 x ST Fiber
128-Channels, 24-bit, AES-10
|
|
Audio Processing
|
277 x 208 mono audio matrix, route 1 to 1, 1 to many
Inputs: 128 embedded, 16 AES, 128 MADI, 2 stereo mixdowns, 3 tone generator
Outputs (Four Channel mode): 16 AES, 128 MADI, 64 embedded
Outputs (Single Channel mode): 16 AES, 128 MADI, 16 embedded
Input adjustment controls for each channel
Gain +18 to -18 dB in 0.5 dB steps
Phase invert
Input adjustment controls for each channel pair
Delay -16ms to +1sec in 20.8 us steps
Two independent 5.1 or 7.1 to stereo mixdown processors with gain adjust
High quality Sample Rate Conversion supported on all audio inputs
SRC bypass for non-PCM audio (e.g. Dolby E, AC-3, etc)
Audio tone generator (mute, 400 Hz, 1 kHz)
|
|
Reference Input
|
External, 2 x BNC
Looping, nonterminating
Blackburst or tri-level sync
|
|
Genlock
|
Lock to External Reference
Lock to SDI input 1 thru 8
Free run based on Temperature Compensated Crystal Oscillator
|
|
Network Interface
|
1 x RJ-45, 10/100/1000 Ethernet
Embedded web server for remote control
SNMP
|
|
User Interface
|
Display
Keypad with status LEDs
Two rotary/push knobs
Comprehensive alarm indicators
|
|
Presets
|
Each mode supports 40 Presets
|
|
GPI
|
1 x 25-pin D-Connector
Four optically isolated GPI inputs
Four optically isolated GPO outputs
|
|
Size (w x d x h)
|
444.5mm x 406.5mm x 44.45mm
|
|
Weight
|
3.6 kg
|
|
Power
|
100-240 VAC 50/60 Hz (Dual, redundant power supplies), 55W typical; 70W max.
|
|
Environment
|
Safe Operating Temperature: 0 to 40 degrees C
Safe Storage Temperature (Power OFF): -40 to 60 degrees C
Operating Relative Humidity: 10-90% noncondensing
|
To discuss at a forum
|
Developed by