LTC-OUT Micro USB (for cameras that accept TC via Micro USB – e.g. Sony FX3/FX30)

• Timecode output cable

• 5-pin push-pull connector (Lemo compatible) to Micro USB

• Compatible with the Sony FX3 & FX30

LTC-OUT-USBC (for cameras that accept TC via USB-C – e.g. DJI Osmo Action)

• Timecode output cable

• 5-pin push-pull connector (Lemo compatible) to USB-C

• Compatible with Osmo Action 3/4

LTC-OUT-USBC-SD (for Sound Devices A20-TX and A20-Mini transmitters)

• Timecode output cable

• 5-pin push-pull connector (Lemo compatible) to USB-C (Sound Devices Only)

• Compatible with A20-TX and A20-Mini from Sound Devices

LTC-OUT-DIN (for cameras with DIN 1.0/2.3 connector – e.g. Canon EOS R5 C)

• Timecode output cable

• 5-pin Push-Pull connector (Lemo compatible) to DIN 1.0/2.3

• Works with Canon EOS R5 C

• Length approx. 60 cm

• Color red

TC-Sync & Trigger RED (TC & Sync + Trigger IN for RED cameras with 4-pin Sync port)

• for RED cameras with 4-pin Sync port (DSMC2 + Expander /w 4-pin Sync port)

• Connector 1: Timecode IN & Sync IN (Genlock) from Lockit devices

• Connector 2: Trigger IN from motor controllers

ACN-TC-RCP-R (Timecode and metadata interface cable for RED cameras)

• Metadata interface cable for RED cameras

• Connecting timecode and metadata from Lockit (ACN-CL) or NanoLockit (ACN-NL-L) to Red Cameras (CTRL and Sync)

• 5-pin Push-Pull connector to 2x 4-pin Push-Pull connector (Lemo compatible)

• plus Trigger-In via BNC

• Length approx. 60 cm

ACN & Tally CTRL RED (ACN & Tally OUT from RED cameras with 4-pin CTRL port)

• for RED cameras with 4-pin CTRL port (DSMC2 + Expander /w 4-pin CTRL port)

• Connector 1: ACN Metadata OUT to Lockit devices

• Connector 2: Tally OUT to motor controllers